Hitachi BD-W75SAE Washer User Manual


 
26
3WPL083851
How to Install the Washing Machine
Connect the washing machine to an alternating current via a correctly
installed earthed socket only.
The mains voltage must correspond to the voltage speci cation on the
washing machine.
Connection speci cations as well as the required fuses are stipulated
on the washing machine nameplate.
Do not plug the washing machine into an extension lead or power strip
with multiple sockets.
All four adjustable feet must be rmly on the ground. The washing
machine must not wobble.
Check the alignment of the washing machine with a spirit level, and
adjust the feet if it’s not aligned.
Loosening 1
Adjustable leg
Elevating
Lock nut
Loosen the lock nut by
unscrewing in the arrow
direction
1 then stabilize
the unit with the adjustable
feet.
Lock nut
Tightening
2
After adjustment, tighten
the lock nut by screwing it
in the arrow direction
2.
Plastic base plate
Tighten the lock nut until it
reaches the plastic base plate.
Adjustable leg is not over 25 mm.
Connecting the
power
Level Adjustment