Henny Penny HHC-990 Clothes Dryer User Manual


 
Model HHC-990
2-4. ELECTRICAL CONNECTION
To avoid electrical shock, the cabinet must be adequately
and safely grounded (earthed) according to local electrical
codes, and this appliance must be equipped with an exter-
nal circuit breaker which will disconnect all ungrounded
(unearthed) conductors. The main power switch on this
appliance does not disconnect all line conductors.
(FOR EQUIPMENT WITH CE MARK ONLY!)
To prevent electric shock hazard this appliance must be
bonded to other appliances or touchable metal surfaces
in close proximity to this appliance with an equipotential
bonding conductor. This appliance is equipped with an
equipotential lug for this purpose. The equipotential lug
is marked with the following symbol
If the electrical supply to the unit is a cord and plug, then the
electrical receptacle, for the plug, must be easily accessible.Refer
to the table below for the electrical ratings for the HHC-990
series cabinets.
Model Volts,60Hz Phase Amps Watts
HHC-990 120 1 24.0 2880
120 1 22.3 2680
208 1 13.8 2880
240 1 12.0 2876
240 1 11.2 2676
220-240-CE 1 11.6 2792
HHC-993/ 120 1 17.3 2080
HHC-992 208 1 10.0 2080
240 1 8.7 2076
220-240-CE 1 8.3 1992
HHC-996 120 1 27.3 3280
208 1 15.8 3280
240 1 13.7 3276
240 1 16.2 3876
220-240-CE 1 13.3 3192
HHC-997/ 120 1 17.3 2080
HHC-998 120 1 24.0 2880
120 1 22.3 2680
208 1 13.8 2880
240 1 8.7 2076
240 1 12.0 2876
220-240-CE 1 8.3 1992
220-240-CE 1 11.6 2792
1004 2-3