Harbor Freight Tools 92336 Washer/Dryer User Manual


  Open as PDF
of 6
 
SKU 92336-SKU92337 For technical questions, please call 1-800-444-3353. Page 5
1. To remove dust, use a damp cloth. To remove grease or oil, use a detergent
based cleaning solvent, rinse with damp cloth, and dry.
Maintenence
Attaching the Stand to SKU 92337:
1. Attach the four Feet (12) to Center Disk (13) with four Screws (14) and
Nuts (15).
See Figure 6.
2. Twist on Center Extension (16) to Center Disk (13). Twist Top Extension
(17) to Center Extension (16) and then the top threaded end to the Base
Plate (11) of the Gumball Machine. Tighten all hardware and connections.
See Figures 7 & 8.
Figure 6
Figure 7
Figure 8
Feet (12)
Screw (14)
Nut (15)
Center Disk
(13)
Center Extension (16)
Top Extension (17)
Threaded
area to
attach to
Gumball
Machine.
Center
Extension (16)
Top
Extension (17)
Feet (12)
Gumball Machine
Base Plate (11)
The 15” Gumball Machine with Stand fits well in a corner or out of the traffic area,
and must be located on a flat, level floor surface.
 previous