Filter
Top Products
4
Using Your Iron
1. Unplug iron. Turn Adjustable Steam
to (Dry Iron).
2. Open Water Fill Cover and, using a
cup, slowly
pour tap water
into water tank
opening until
Max fill line is
reached. Do not
fill the iron
directly from
the faucet.
3. Plug iron into outlet.
4. Turn the Temperature Control Dial to
desired fabric
setting in the
steam range.
5. Allow two minutes for the iron to
reach desired temperature.
To Steam Iron
6. Set Adjustable Steam to the recom-
mended steam
level. See the
“Fabric Setting
Chart.”
7. To turn iron off, set Adjustable
Steam to (Dry Iron). Turn the
Temperature Control Dial to Off.
Unplug iron.
8. Empty water from the iron following
directions in “Caring for Your Iron.”
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
To Dry Iron
3. Turn Temperature Control Dial to
desired temp-
erature. Allow
two minutes for
iron to reach
desired
temperature.
4. To turn iron Off, turn Temperature
Control Dial to Off and unplug iron.
1. Plug iron into outlet.
2. Set the Adjustable Steam Control
to ( Dry Iron).
840154800 Ev03.qxd 10/30/06 9:10 AM Page 4