Filter
Top Products
7
Caring and Cleaning
Iron
1. Turn Temperature Control Dial to Off (O). Unplug and let
cool. The iron takes longer to cool down than it does to
heat up.
2. To empty water from iron, slowly tilt pointed end of iron
down over a sink. Water will run out of water tank opening.
3. Wrap cord loosely around iron and store iron in an upright
position. Do not store iron laying flat on soleplate.
Soleplate
1. Never iron over zippers, pins, metal rivets, or snaps, as
these may scratch the soleplate.
2. To clean occasional build-up on the soleplate, wipe with
a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.
3. Always store iron upright in the heel rest position.
6
Optional Features (on select models)
Auto Shutoff Reset Button/Light
This light comes on when the iron is first
plugged in. After one hour, the iron will
shut off and the light will go out. Push the
Reset Button to turn the iron back on for
another hour of ironing.
Power On Light
This light comes on when the iron is
plugged in and remains on until the iron is
unplugged. The light stays on even if
Temperature Control Dial is turned to Off.
Spray Button
Push spray button to release a fine spray
of water for difficult wrinkles in cotton or
linen.