Filter
Top Products
76
7
This warranty applies to product purchased in the U.S.
or Canada.
LIMITED WARRANTY
This product is warranted to be free from defects in material and workmanship for a
period of two (2) years for Hamilton Beach Portfolio products, one (1) year for Hamilton
Beach products or one hundred eighty (180) days for Proctor-Silex products from the
date of original purchase, except as noted below. During this period, we will repair or
replace this product, at our option, at no cost. THE FOREGOING WARRANTY IS IN
LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR
ORAL INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ANY LIABILITY IS EXPRESSLY LIMITED TO AN AMOUNT
EQUAL TO THE PURCHASE PRICE PAID, AND ALL CLAIMS FOR SPECIAL,
INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED. There is
no warranty with respect to the following, which may be supplied with this product:
glass parts, glass containers, cutter/strainer, blades, and/or agitators. This warranty
extends only to the original consumer purchaser and does not cover a defect resulting
from abuse, misuse, neglect, use for commercial purposes, or any use not in
conformity with the printed directions. This warranty gives you specific legal rights,
and you may also have other legal rights which vary from state to state, or province to
province. Some states or provinces do not allow limitations on implied warranties or
special, incidental or consequential damages, so the foregoing limitations may not
apply to you.
If you have a claim under this warranty, DO NOT RETURN THE APPLIANCE TO THE
STORE! Please call our CUSTOMER SERVICE NUMBER. (For faster service please
have model, series, and type numbers ready for operator to assist you.)
CUSTOMER SERVICE NUMBERS
In the U.S. 1-800-851-8900
In Canada 1-800-267-2826
hamiltonbeach.com or proctorsilex.com
KEEP THESE NUMBERS FOR FUTURE REFERENCE!
6
Caring and Cleaning
Iron
1. Turn Temperature Control Dial to Off (O). Unplug and let
cool. The iron takes longer to cool down than it does to
heat up.
2. To empty water from iron, slowly tilt pointed end of iron
down over a sink. Water will run out of water tank opening.
3. Wrap cord loosely around iron and store iron in an upright
position. Do not store iron laying flat on soleplate.
Soleplate
1. Never iron over zippers, pins, metal rivets, or snaps, as
these may scratch the soleplate.
2. To clean occasional build-up on the soleplate, wipe with
a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.
3. Always store iron upright in the heel rest position.
840121900 Ev02.qxd 12/19/03 1:47 PM Page 6