Hamilton Beach 840104900 Iron User Manual


 
7
This Warranty Supersedes All Other Product Warranties
LIMITED WARRANTY
This product is warranted to be free from defects in material and workman-ship
for a period of one (1) year from the date of original purchase, except as noted
below. During this period, we will repair or replace this product, at our option,
at no cost. THE FOREGOING WARRANTYIS IN LIEU OF ANY OTHER
WARRANTY, WHETHER EXPRESSOR IMPLIED, WRITTEN OR ORAL
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. ANYLIABILITY IS EXPRESSLY LIMITED TO
AN AMOUNT EQUAL TO THE PURCHASE PRICE PAID, AND ALL CLAIMS
FOR SPECIAL, INCIDENTALAND CONSEQUENTIAL DAMAGES ARE
HEREBY EXCLUDED. There is no warranty with respect to parts subject to
wear supplied with or a part of this product. This warranty does not cover
defects resulting from abuse, neglect, or any use not in conformity with the
printed directions. Always use this product in accordance with the Operation
Manual.
If you have a claim under this warranty, please deliver or mail the product to the
nearest authorized service center which you can locate by calling our toll-free
customer service number 1-800-572-3331 or by looking in your local yellow
pages for the nearest authorized Hamilton Beach Commercial Service Center.
Caring and Cleaning
6
Iron Storage
1. Turn Temperature Control Dial to Off (O). Unplug and let cool.
The iron takes longer to cool down than it does to heat up.
2. To empty water from iron, slowly tilt pointed end of iron down
over a sink. Water will run out of water tank opening.
3. Wrap cord loosely around iron and store iron in an upright
position. Do not store iron laying flat on soleplate.
Soleplate
1. Never iron over zippers, pins, metal rivets, or snaps, as
these may scratch the soleplate.
2. To clean occasional build-up on the soleplate, wipe with
a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.
3. Always store iron upright in the heel rest position.
Self-Clean
To keep the steam vents clear of any build-up, follow these
instructions each time you iron using steam.
1. Fill iron with water.
2. Plug in iron and ironing board. (See page 4 for more infor-
mation.) Turn Temperature Control Dial to the highest
temperature.
3. Let iron heat for 3 minutes.
4. Turn Temperature Control Dial to OFF. Unplug iron and hold
over a sink with the soleplate facing down.
5. Turn Adjustable Steam Dial to Full Steam . Hot water
and steam will flow out of the steam vents.
6. Allow all water to drain from iron then let cool and store.
840104900 Ev01.qxd 9/6/02 1:45 PM Page 6