Filter
Top Products
54 5
HOW TO DRY IRON
1. Push the STEAM or DRY IRON/CLEAN switch to DRY
IRON/CLEAN.
2. Turn temperature control dial to desired temperature. Allow
two minutes for iron to reach desired temperature.
1. Unplug iron. Pour 6 ounces (
3
/
4
cup) of ordinary tap water in-
to water tank opening. Plug iron into outlet.
2. Push the STEAM or DRY IRON/CLEAN switch to STEAM.
3. Turn temperature control dial to desired setting in the
steam range. Allow two minutes for the iron to reach desired
temperature.
Water
Please use ordinary tap water. If you have extremely hard water,
alternate between tap water and distilled water for use in the
iron.
HOW TO STEAM IRON
FEATURES - Not All Features On All Models
STEAM or DRY IRON/CLEAN Switch
This switch provides continuous steam
in the STEAM position. Push the switch
to change to dry ironing and to clean
the steam valve.
Spray
Push to release a fine spray of water
for difficult wrinkles in cotton or linen.
KNOW YOUR IRON
Acetate
Silk, Acrylic
Nylon, Rayon
Polyester
Cotton Blends
Permanent Press
Wash N' Wear
Wool Blends
Ramie
Flax
1 DELICA
2 LIGHT
3 EASY CARE
4 WOOL
5 COTTON
6 LINEN
ELECTRONIC SHUT-OFF MEMORY
SPRAY, BLAST, STEAM & DRY
REFILL
FULL
®
6
•
5
•
4
•
3
•
2
S
T
E
A
M
R
A
N
G
E
Temperature
Control Dial
Controls
Soleplate
Heel Rest
Fabric Guide
Water Tank
Opening
• During first use of the iron, it may appear to smoke. This
will stop and does not indicate a defect or hazard.
• Many irons spit or sputter during the first few uses with
tap water. This happens as the steam chamber becomes
conditioned. This will stop after a few uses.
• Steam vents should be cleared before first use. Prepare
iron for steam ironing, then iron over an old cloth for a
few minutes while letting iron steam.
cord so that it cannot be pulled on by children or tripped over.
This appliance is equipped with a polarized plug. This type of plug
has one blade wider than the other. The plug will fit into an electrical
outlet only one way. This is a safety feature. If you are unable to insert
the plug into the outlet, try reversing the plug. If the plug should still
fail to fit, contact an electrician to replace the obsolete outlet. Do not
attempt to defeat the safety purpose of the polarized plug.
It is a good safety practice to always unplug the iron when not in
use.
Water Window
Swivel Cord
PLEASE READ BEFORE FIRST USE