Filter
Top Products
4
1. Unplug iron. Fill Removable Reservoir
according to directions. Replace
Reservoir.
2. Plug iron into outlet.
3. Turn the Temperature Control Dial to
desired fabric
setting in the
steam range.
Set the
Adjustable
Steam Switch
to the recom-
mended steam
level. See
“Fabric Setting Chart” on page 3.
To Steam Iron
4. Allow 2 minutes for the iron to reach
desired temperature.
5. To turn iron off, set Adjustable
Steam Knob to O (Dry Iron). Turn the
Temperature Control Dial to Off.
Unplug iron.
6. Empty water from the iron following
directions in “Caring for Your Iron.”
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
To Dry Iron
3. Turn Temperature Control Dial to
desired temp-
erature. Allow
two minutes for
iron to reach
desired
temperature.
4. To turn iron Off, turn Temperature
Control Dial to Off and unplug iron.
1. Plug iron into outlet.
2. Set the Adjustable Steam Switch to
O (the Dry Iron
position) or
empty water
from reservoir.
Using Your Iron
1. Unplug iron. Set the Adjustable
Steam Switch to O (Dry Iron).
2. Press and hold release button and
pull straight up
on reservoir.
Use caution
and do not let
your hand
touch the hot
soleplate.
To Remove, Fill, and Replace Reservoir
3. Slide open reservoir fill opening
cover. Slowly pour in 4 ounces of
water. Close cover.
4. Firmly place reservoir in position and
push until it snaps back into place.
5. Reset the Adjustable Steam Switch
to desired steam level.
NOTE: The reservoir can be filled in place or removed for filling.
840094100 ENv01 1/17/02 11:46 AM Page 4