Filter
Top Products
Using process
Using process
After switching on, the washing machine reserved wash program will be automatically set
i
nactive. If you desire a wash cycle to end at a reserved time, you can press the
"RESERVATION/CALEFACTION"button to set a reserved wash program.
Refer to The button of
"RESERVATION/CALEFACTION" on page 11.
When "Reservation" becomes active, the nixie tube displays the time
to the end of the reserved wash cycle, and the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
the washing will finish
about 18 hours later
Confirm the reserve program
START
PAUSE
6 Press the "start/pause" button
5 Push the " RESERVATION/CALEFACTION"
button to select suitable reserve program
Close the top lid
Finish washing
Except water filling (excluding heating function) and draining process,
if the top lid is opened, the machine will stop running and alarm.
The washing machine cuts off the power supply
automatically when wash cycle ends.
After switching on the power, press the button "WATER LEVEL" to select a water level according
to the load. Please refer to the button " Water level" on page 10.
Page 10
4 Press the "WATER LEVEL" button to select suitable
water level
Page 11
14
WATER
SELECTION
LEVEL
CALEFACTION
ATION
RESERV
Keep pressing the"RESERVATION/CALEFACTION" button for more than 2 s,
the heating indicator turns on (red).
Keep pressing the
"RESERVATION/CALEFACTION"button for more than 2 s again, the
heating indicator turns off and heating function is cancelled.
After the machine starts running, if selection or cancellation of heating function
is desired, you should switch off the power and reselect.
Confirm the heating function