Filter
Top Products
Using process
Using process
Disposal after washing
When washing, lint filter must be used
After using, please clean it in time.
Lint filter:
1.
Pull upward to detach
2.Clean the lint
Put it in water and clean while it is still wet.
(See to Figure 1).
3.
Press downward to assemble.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
7
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence
your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour),
then close the top lid.
4.Hang up the power cord and drain hose.
3.Be sure to pull off the power plug before maintenance.
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
Clean
Figure 1
Figure 2
Pull down
Put up
The filter screen of the water inlet
valve is likely to be blocked by
foreign materials and influence the
water inlet. Please clean it with
brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol
etc.
Thin
ne
r
Alcohol
Petrol
After Finishing wash
alarm automatically
The washing machine cuts off the power supply
automatically when wash cycle ends.
6 Finish washing
Pull down
Put up