1. The height of the drain hose shall be less than
10 Cm, or the drainage will not be smooth , and cost
such long time that machine may stop at mid way.
2. Do not step on or press the drain hose.
3. If the drain hose is too long , cut it at mid point.
To make smooth drainage, cut the front end of the
hose into slope.
4. If extra drain hose is needed, please make
separate purchase. The inner diameter of the
extra hose shall not less than 30 mm, and the
length shall not exceed 1.5m.
If the extra hose is too long, cut it either at
A or at B point.
Remarks: during operation, be sure to put down the drain hose to ground to ensure that the recycled
water can flow out. Otherwise it will result in incomplete recycled water drainage, and unable to spin etc.
Usage of the lower drain hose
Before Using
Before Using
The drainage shall be smooth with the drain hose.
<10cm
> 30mm
<1.5m
A
B
A
Useage the drain hose
Before using , hang up the drain hose on suitable location.
Do not put down the drain hose on the ground.
<1.2m
Confirm the end of drain hose is higher than the level
of tub . If not the siphon will being .