Filter
Top Products
5
How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation
position of the drain hose.
Extend the drain hose from the side of spin tub.
Take off the drain hose from the hanging hole
of the cabinet. Pull the drain hose fixing hook
outwards gently to take out the drain hose
from the two fixing hooks. (As per Figure 2)
Rotate the drain hose fixing hook for 90 to take it
out from the installation hole (As per Figure 3).
Pull the fixing hook outwards slightly. Inlay the
drain hose into the fixing hooks reliably along
the groove at spin tub side, and make it extend
towards spin tub side.
Install the two drain hose fixing hooks taken
out into the installation hole at the other side
of the base frame (to aim at the installation
hole accurately you can lean the washing
machine forward slightly).Then rotate
for 90 (As per Figure 4).
Extend the drain hose from the rear side
Take out the drain hose from the fixing hook. Extend it from the rear side
(When the drain hose is extended from the rear side, it can be hung on the
point for drain hose at the two sides of the cabinet.) (See to Figure 6).
Figure 1
Drainhose
fixing hook
Figure 2
Drain hose
fixing hook
Pull outwards
slightly
Side sectional view
Fixing hook
installation hole
Drain hose
Take off
the drain hose
Figure 3
Take off the fixing
hook downwards
Rotate thefixing
hookfor 90
Figure 4
Insert the fixing hook into the
installation hole upwards
Rotatethe fixing
hook for 90
to fix it
Figure 5
Figure 6
Then hang the drain hose into the hanging hole at
the spin tub side. (As per Figure 5).