Filter
Top Products
Speed
6. Press the button of Soil to suit differently
soiled clothes.
8. Press the button of Cycle Signal , which will
accordingly remind you of the cycle completion.
Confirming a reserved program
Page 8
Page 9
Page 9
Using process
Using process
5. Press the button of Speed to select suitable wash
and spin speeds
After the power is switched on, the washing machine will automatically set as
Normal/Fast . If the user desires to change it, press this button to select
according to Speed on page 8.
Wash/Spin
Soil Level
After the power is switched on, the washing machine automatically sets at Heavy ,
the user may judge the clothes soil degree and select with the Soil level button
himself. See Soil on page 8.
Page 8
Temp
Wash/Rinse
7. Press the button of Temp. Wash/Rinse to select
different washing temperatures.
After the power is switched on, the washing machine will automatically set at
Warm/Cold . The user could also set three wash conditions of hot, warm and
cold. Refer to Temp. Wash/Rinse on page 9 to select.
Cycle
Signal
After the power is switched on, the washing machine will automatically set at Low .
The user himself could also set three warning volumes Louder, Softer or Off for the
completion of a cycle. Refer to Cycle Signal on page 9 to select.
9 Press the button of Delay/Start to select a suitable
reserve wash program
Delay
Start
After switching on, the washing machine reserved wash program will be
automatically set inactive. If you desire a wash cycle to end at a reserved time,
you can press the Delay/Start button to set a reserved wash program. Refer to
The button of 'Delay/Start' on page 8.
Page 8
When delay starts, program selected indicator turns off, while
the delay Indicator and remaining time turn on. During
reservation period, pressing Delay/Start button could
get reservation conditions displayed.
The wash cycle will end after 18 hrs