Filter
Top Products
Washing sequence
8
Figure 4
Figure 1
Spin timer
Wash timer
(To set to below 2 minute,
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
(To set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
Wash
Figure 3
Figure 2
Inlet selector
Wash selector
(Standard current,
strong current)
1 Inlet selector
(1)
Set fill selection to Wash side .(Figure 1)
(2 )
Adjust water level rod to a position as needed.
2 Fill water and add solved powder detergent until
water reaches a suitable level.
(Figure 2)
It begin to wash to dispense detergent uniformly.
3 Put in the wash load, and supplement water
as necessary.
4 Select the current
Select the strength of the current according to
the laundries. (Figure 3)
5 Select the washing time
Select the washing time according to the
laundries. (Figure 4)
6 After washing,set the DRAIN SELECTOR
at DRAIN .(Figure 5)
WASH
SPIN
WASH TIMER
DRAIN SELECTOR
Figure 5
WASH
SPIN
Drain selector
(Do not set drain selector
on Drain position during
washing)
SPIN TIMER
WASH SELECTOR
DRAIN SELECTOR
4
3
2
1
5
OFF
O
FF
DRAIN
DRAIN
12
9
6
3
15
OFF
OFF
WASH TIMER
Spin timer
(To set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
Drain selector
SPIN TIMER
DRAIN SELECTOR
4
3
2
1
5
OFF
O
FF
DRAIN
DRAIN
STRONG
STANDARD
WASH SELECTOR
DRAIN
OFF
OFF
3
6
9
12
15