Haier HWM 80-200 S Washer User Manual


 
7
8
Introduction of the major function
1. The machine has good comprehensive performance, and nice
appearance.
It adopts streamline appearance and full plastic shell, which will never get
rust. For the design on safety and reliability, it adopts the wash shelf, spin
shelf and water reception groove design, and reduces the unfavorable
unfavorable influence on the electrical component by the vapor. Therefore it
guarantees more safe and reliable washing.
2. By the technology of comprehensive energy-saving, the machine can
Use the foam-removing spinning to remove the extra detergent liquid. It can
both shorten the washing time and save the water consumption.
Quick water-filling entrance
If you do not need spraying spin, you can fill water into the wash tub directly
through this entrance. It can reduce the humidity inside the control panel
Foam-removing spinning during high-efficiency rinsing
Foam-removing spinning
Spin for about
1-2 minutes
Fill water for
about 1 minutes
Remove most of the foam
extra detergent liquid.
Spin
Remove the detergent liquid remained.
{
Quick water-filling
entrance
-3
-1
-2
Before Using
Connect the water inlet
hose.
Confirm that the washing
machine is earthed reliably.
Than insert the power plug
into the receptacle. Do not
connect the earth terminal to
the gas pipe and tap water
pipe.
Put down the drain hose.
Slanting or uneven ground
may result in unsatiable
working or abnormal noise.
Please make the machine
stand horizontally.
1.
2.
3.
4.
Preparation before washing
Pay attention to followings before washing the laundries
Confirm if
there's special
requirement for
the laundries.
Clear the
pocket. Take
out the coins,
sand, hairpins
etc.
Fasten the
button and
zippers.
The quantity of
the laundries
shall not
exceed the
rated value.
The big
laundries like
the jeans shall
be put in
loosely.
When the
pulsator is
running, the
buttons of the
laundries may
cause noise.
For the sake of
discretion,
please put the
laundries with
buttons into
other laundries.
-1
-2
-3
-4
Preparation before washing
Using Process