Filter
Top Products
15
16
Using Process
After using, please clean the lint and foreign materials of the lint filter and lint frame in time.
Otherwise it may influence your using the machine.
Please first pull the power plug from the receptacle before cleaning.
-1
-3
Cleaning the lint filter
The lint filter must be used during
washing.
It must be cleaned in time after each
using.
Take off the lint filter
Put hand at the indicated position.
Push down to take it off.
(See to Figure 1)
Clean the lint
Put it in water and clean while it is
still
wet. (See to Figure 2)
Install the lint filter
After cleaning, insert the bottom of
the lint after filter (marked with
"DOWN SIDE") into the filter frame,
then push the upper part of the filter
i n ( m a r k e d w i t h
"UP SIDE").(See Figure 3)
1.
2.
3.
Disposal after washing
Using Process
Disposal after washing
Figure 2
Figure 3
Figure 1
Cleaning the frame filter
Too much lint on the overflow filter
will influence the normal usage of the
machine. Please clean it every two
months.
Take off the overflow filter
As indicated in the figure, nip the
elastic fixing claw and pull it to the
direction of the arrow to take it off.
Take off the corrugation pipe.
Dismantle the upper inside the
overflow filter (as indicated in
Figure1).
Clean the overflow filter
Clean the lint around the filter and
flush with tap water.
Install the overflow filter
(1) Install the corrugation pipe.
(2) Insert the mounting plate at the
bottom of the filter into original
position.
(3) Hang up the hook at the left upper
side.
(4) Push the upper part in as
indicated in Figure2.)
1.
2.
3.
4.
-1
-2
-3
Hook
Figure 2
Water
1
Pipe
Figure
level
adjusting lever
Elastic fixing
claw
-2
-4
(4)