Filter
Top Products
14
During Standard or Memory program with washing process. The washing machine can detect
the laundries automatically. After detection, it will set the water level to suitable value among
35L, 45L, 53L,61L,70L (26L, 33L, 39L, 45L, 51L for HWM70-928NZP) automatically.
●
●
Water level could also be determined by user, but it couldn’t automatically again after this
machine started.
You shall push the “Start/Pause “ button to make new setting.
If there’s water inside the tub, the machine cannot detect the laundries and will display water
level 45L(33L for HWM70-928NZP). If wet laundries are put in, it may display water level 70L(
51L for HWM70-928NZP). You must set suitable water level by yourself.
●
During operation of Wash and Rinse programs, you can push down the Water Level button
●
to add water. When you release the button, or it reaches the overflow water level, the
machine will stop adding water.
The water level decided may be different from actual value because of the different
●
moisture level of the laundries.
The rinse water value will be one level higher than the wash water value.(Except the highest
water level and when the rinse water level is selected by yourself).
●
Under the wool and Blanket program, only the 45L to 70L water level(33L to 51L for HWM
70-928NZP) can be selected.
●
E “Water Level” button
Press the “Soak”,“Wash”“Rinse”,“Spin” button to select the desired soak time,wash time,
rinse times and spin time from the Standard, Normal, Memory, Cotton, Child, Night Wash
programs.
●
Press “Wash”“Rinse”,“Spin” button can change the process, can not change wash time,
rinse times and spin time from the Blanket programs. Press “Soak” button, can not change
time and the process from the Blanket programs.
●
●
For Wool program, press “Soak”,“Wash”“Rinse”,“Spin” button, can not change times and
the process.
●
During rinsing times setting, it could be selected whether overflow rinsing is required or not
according to actual demand. If overflow rinsing is set, water is continued to fill into the washing
machine after setting level is reached, until it is overflow, then foam in barrel will spill out of
spillway port, so as to prevent foam and dirt floating on surface pollute laundry again (note:
if low level or pressure is selected, and it may not reach overflow level, then overflow rinsing
will transfer to storage rinsing.)
D “Soak”“Wash”,“Rinse”,“Spin” button
●
●
For Standard, Normal, Memory, Cotton, Wool, Child, Blanket, Night Wash program,
press “Strong” button, can increase washing time from originally time(arrive at 25 minutes at
most), can increase rinse times3 times at mostpress “Quick” button, can reduce washing
time from originally time(at least 8 minutes), and rinse times become once.
Press “Quick” button over 5sec. it could enter standard test program after standard indicator
become flash.
F “Quick”“Strong” button
●
●
●
Press “Speed” button can adjust WashRinse,Spin speed.
For Standard, Normal, Memory, Cotton, Child, Night Wash program, press “Speed” button
once, can set differ speed: Low, Medium, High.(differ water level default differ speed: the first
4 low water level default low speed, the middle 4 water level default medium speed, the last
4 high water level default high speed)
G “Speed” button
For Wool, Blanket program, press “Speed” button, can not adjust speed, default low speed.