Filter
Top Products
Times of pushingthe
SELECT button
Push the SELECT button for 6 times, and it will resume the initial mode. It will circulate in that sequence.
The SOAK procedure can work in cooperation with automatic programs like standard and night. There is
intermittent pulsator stirring during soak.
Selected procedure
Applicable circumstance
Contents (the lighted indicators
indicate the programs about to run)
Spin
(spin after drain)
WASH
(the washing liquid
remains in the tub)
When the common laundries need
washing, rinsing and spinning.
SOAK WASH RINSE SPIN
Repeat using the washing liquid
When the laundries need only
spinning after manual washing (first
drain then spin)
The laundries are very dirty, or the
sleeves and collars of the shirt are
very dirty. First soak then wash.
5 Push the WATER LEVEL button to select suitable water level
4 Push the WATER INLET button to select water inlet mode
After the power is switched on, the washing machine will execute fuzzy program automatically to detect the cloth. After
defection, it can set the water level automatically. To select other water level, push the WATER LEVEL button to set the
water level. Refer to WATER LEVEL in Page 10 for selection.
After the power is switched on, the washing machine will set to COOL WATER inlet mode automatically. To
select WARM WATER only or both COOL WATER and WARM WATER, push the WATER INLET button to make
selection. See to WATER INLET in Page 10 for details.
WATER
LEVEL
Page 9
Page 10
WASH - SPIN
RINSE - SPIN
WASH - RINSE
(the rinsing liquid
remains in the tub)
SOAK - SPIN
When prevent the laundries from
corrugating, and the laundries do not
need spinning
SOAK WASH RINSE SPIN
SOAK WASH RINSE SPIN
SOAK WASH RINSE SPIN
SOAK WASH RINSE SPIN
SOAK WASH RINSE SPIN
Page 10
7 Push the RESERVE button to select suitable reserve wash program
6 Push the CURRENT button to select suitable water current
After the power is switched on, the reserve program is set to off mode automatically. If you need to set the washing
procedure to be finished at reserved time, please push the RESERVE button to set the reserve wash program. Refer to
RESERVE BUTTON in Page 11 for selection.
After the power is switched on, the washing machine can set the current automatically according to the laundries. If you
need to select current by yourself, please push the CURRENT button.
Refer to CURRENT in Page 10 for details.
When the RESERVE function is activated, the indicator of the program you have set will be
off. The RESERVE (HOUR) and TIME REMAIN indicators will be on. During reserve
procedure, you can push the RESERVE button to display the reserve mode.
To change the running program or cancel the reserve setting, you need to switch off the
power and make new selection.
The washing will be finished after18 hours.
Confirm the operation of reserve program
Page 10
RESERVE
Reserve time from 2 to24 hours
When the laundries need rinsing
And spinning after manual washing
13
Procedure selection method