Filter
Top Products
a Description of the function of the operation buttons
Balance display
If the bulb of the level meter is inside the standard circle, it indicates
that the machine is horizontal.
Cool water
WATER INLET button
CURRENT button
When the washing machine starts running, it
will set the current automatically.
You can select current by self according to the
actual requirement.
Please do not select strong current under low
water level to avoid splashing and vibration.
In FAST and GENTLE programs, the washing
machine will set the current automatically, and
the users cannot select current in that case.
Select the fuzzy program. After cloth detection, the water
level will be set to one out of 4, 6, 8, and 10.
If there's water inside the tub, the machine cannot detect
the cloth and will display water level 6
If wet laundries are put in, it may display water level 10
You can also set water level by self. After the machine is
started, it will not detect the cloth.
If quick program is selected, the water level will be set to 2
automatically. When level is reached, it will perform
washing while filling water. The 2 water level indicator is
on, and the 4 water level indicator is flashing. When the “4”
water level is reached, it will stop filling water. 2 level
indicator is off, and 4 level indicator is on. It will perform
normal washing.
WATER LEVEL button
COOL
STRONG
CURRENT
WATER
LEVEL
WATER
INLET
Balance display
4 Use the operation buttons
In starting the machine, it is set to COOL
WATER automatically
Push the button to select one from the three
modes of COOL WATER only, both WARM
WATER and COOL WATER, or hot water only.
Note that the water temperature inside the
tub shall not exceed 50 .
Using process
Using process
Using process
Using process
No requirement on water temperature
Cool water
Warm water
If the hot water temperature is too high
and needs to be mixed with cool water
Warm water
When the temperature of hot water is
suitable, or when you need to improve
the water temperature inside the tub
Mode and meaning of the indicator
Flash: indicating the running mode
On: indicating the mode about to run
Flash rapidly: indicating abnormal situation