Haier HWM70-1203D Washer User Manual


 
16
Fig.1
Fig.1b
1
.
2.
Fig.1c
maintenance
cLeAning & cAre
AFTER WASHING
Turn off the water supply and pull out electricity plug(Fig.1) after each
wash. Open the washer door to prevent formation of moisture and
odours. If the washing machine is left idle for a long period, turn off
water supply (Fig.1b)drain the water in the machine and replace the
drain hose.
CLEANING THE DETERGENT DRAWER
Clean the detergent/softener drawer regularly.
REMOVING DETERGENT DRAWER
Slide out draw (in direction shown in Fig.1c) until draw release is visible.
Flush it clean with warm water, dry and then replace it.
CLEANING THE MACHINE
Unplug the machine during cleaning and maintenance. Use a soft cloth dampened with soap liquid to clean the machine case and
rubber components. Do not use organic chemicals or corrosive solvents.
CLEANING THE FILTER
Caution: Place a container under the drain pump filter, to collect any excess water that may come out of the
drain pump when the filter is removed.
Clean the filter once a month:
1. Open the bottom cover (Fig. 2).
2. Remove the filter by turning counterclockwise (Fig. 2b).
3. Flush the filter clean with running water (Fig. 2c).
4. Replace the filter by turning clockwise and remount the cover
(Fig. 2d).
Caution: The filter must be in place during operation, ensure
it is in place after cleaning to avoid leakage.
Fig.2
Fig.2c
Fig.2d
Fig.2b