Filter
Top Products
"START/PAUSE" button
After the power is switched on, press it to
start the machine
During working, push it to pause.
During pause, push this button to restart
and go on working
Connection between the water inlet hose and the washer
1.Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 .Put the nut of the water inlet hose on the valve jointer.
3 .Fasten the nut. Swing it gently to confirm if it's suitable.
nut of the water
inlet hose
jointer of the
water inlet valve
water absorption
cushion.
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Locking level
the jointer of the
water inlet hose
Slider
Check the connection between the jointer of the water inlet hose
and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider.Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept
on the faucet to prevent damaging the fixing screw.
Locking level
Slider
Description of operation button
5 Use the operation button
Indicator mode and meaning
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
a
""RINSE button
"SOAK "button
"WASH/SPEED " button
"SPIN/SPEED " button
Press the Soak button to select a soak
procedure.
The button is unavailable from the
Saving,Speedily, Standard, Woollen,
Carpet and Delicate programs.
Press the Wash button to select a
wash .procedure
The button can be used to select
the desired wash time( 0,6,9,12,15
minutes) from the Normal and
Comforter program.
For a pause during operation or an
initial operation, press the button
for 2 seconds to start wash speed
selection. The Wash indicator lamp
is on and the speed from 1 to 4 is
available for selection. The default
value is 2. After restart, the machine
is back to wash selection.
Press the button for 2 seconds.
There is a buzz that indicates the
speed selection is complete. Then
the wash cycle can be selected.
Press the Rinse button to select a
rinse .procedure
The button can be used to select
the desired number of rinse cycles,
(0, 1, 2 , 3 times )from the Normal
program or the Comforter program.
While the "Overflow" digitron is
lighting,the program of the overflow
rinse has been selected.
For the Normal program, the Water
Saving mode is selected
automatically. If the button is
pressed before operation, it will
change to Water Filling mode.
Press the Spin/Speed button to
select a spin .procedure
The button can be used to select
the desired spin time(1,3,5,7
minutes )from the Normal program
or the Comforter program.
For a pause during operation or
an initial operation, press the
button for 2 seconds to start spin
speed selection. The Spin
indicator lamp is on and the
speed from 1 to 4 is available for
selection. The default value is 2.
After restart, the machine is back
to spin selection.
Press the button for 2 seconds.
There is a buzz that indicates the
speed selection is complete.
Then the spin cycle can be selected.
Note: No speed selection from the
Woollen, Carpet and Delicater
programs.
Soak
Wash
Overflow
Wash/spin
speed
4
2
Rinse
Spin
SPIN
SPEED
RINSE
SOAK
WASH
SPEED
START
PAU
SE
The button can be used to select the
desired soak time( 10, 20 minutes)
from the Normal and Comforter
programs.
The button is unavailable from the
Saving,Speedily, Standard, Woollen,
Carpet and Delicate programs.
The button is unavailable from the
Saving,Speedily, Standard, Woollen,
Carpet and Delicate programs.
The button is unavailable from the
Saving,Speedily, Standard, Woollen,
Carpet and Delicate programs.
Child lock function
Push and hold the water level button and spin button, then push down the
power on/off button .The digitron displays C L .You can continue setting
desired washing procedures. After setting ,push down the start/pause
button. The child lock function is activated. all of the buttons are locked
and cannot make selection .
Release the child lock function :push down water level button and spin
button at the same time for more 2seconds .After a beep sound ,the child
lock function is released.
The function is intended for children safety and preventing the washing
program from accidental changes by children.