Fabric Softener Dispenser:
The fabric softener dispenser is located on the top of the agitator.
Dispenser will automatically release liquid fabric softener at proper time during
rinse cycle.
Steps to use the dispenser:
1.Pour in liquid fabric softener into dispenser as
recommended by the manufacturer.
2.Add water up to its fill lever, but do not exceed the level.
Warning:
Never pour fabric softener directly onto clothes because it will stain your
clothes or you may get spots on your clothes.
Do not stop washer during its first spin or dispenser will automatically
release the softener in to the wash load.
Do not use power form of softener into dispenser other wise it will clog up
the dispenser.This dispenser is only designed for liquid form.
detergent dispenser
9
Liquid fabric softener dispenser
Loading the Washer:
Load each item loosely.
Separate the white and colored clothes. Separate heavy clothes
from light clothes.
Carefully check all pockets and cuffs for small items.
They can easily slide in to the tub and may damage the tub.
Pre-treat all stains and heavily soiled areas for best results.
Do not overload your washer.
When loading wet items, keep water level high enough so items
can float easily in the water.
Close the door properly after loading the clothes. if you keep the
lid up, the washer will not start.
Proper Use of Detergent:
It is good washing practice to add the
detergent to the water before you add
the clothes so that the detergent can work
effectively on your clothes.
Notes: You can less or more detergent depending
on the size of the load, water type in your
living area, whether it is soft or hard and whether the
clothes are heavily soiled or lightly soiled.