Filter
Top Products
Washing sequence
9
Water inlet
Water inlet
Spin timer
Wash timer
Wash timer
Wash selector
( To set to below 2 minute,
first set to 5 minute then
turn it back. it can increase
the service life of the timer )
(Strong current,
standard current)
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer)
SPIN TIMER
SPIN TIMER
WASH TIMER
WASH SELECTOR
WASH SELECTOR
12
9
6
3
15
OF
F
OF
F
DRAIN
STANDARD
STANDARD
STRONG
STRONG
4
3
2
1
5
O
FF
O
FF
WASH SELECTOR
Wash
Figure 4
WASH TIMER
Figure 3
WASH SELECTOR
1. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 1)
Run washing program for some time to stir and
dissolve the powder completely.
2.Put in the laundries. If the water quantity is
insufficient, please add water.
3.Select the current.
Select the strength of the current according to
the laundries. (Figure 2)
4.Select the washing time
Select the washing time according to the
laundries. (Figure 3)
5.After washing,Set the "WASH SELECTOR"
at "DRAIN". (Figure 4).
Figure 2
Figure 1
9
12
6
3
15
OFF
O
FF
DRAIN
STANDARD
STRONG
STANDARD
STRONG
DRAIN