Filter
Top Products
13
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use the "Twice wash" program
for the woolen laundries.
Wash the laundries that are prone to
lose colors separately from other laundries.
The pulsator will not rotate unless the water is filled to selected water level.
Attention
Times of pushing
button
""PROCESS
If you push the PROCESS button for 6 times, it will resume the original mode, and it will
circulate like that.
The soak program can be used as fitting of the STANDARD & JEANS automatic programs.
Soak with slight stirring before wash.
""
0
1
2
3
4
5
Applicable procedure
Contents(the lighted indicators
indicate the programs about to run)
Spin(spin after
drain)
Wash(the washing
liquid remains in
the tub)
When the common laundries
need washing, rinsing and
spinning.
Repeat using the washing
liquid
When the laundries need
rinsing and spinning after
manual washing
When the laundries need only
spinning after manual
washing (first drain then spin)
If the laundries are very dirty,
or the sleeve and collar are
dirty, first soak then wash
Wash, rinse, spin
Rinse, spin
Wash, rinse(the
rinsing liquid
remains in the tub)
Repeat using the washing
liquid
Selection method of the process programs
Selected procedure
program
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak, wash,
rinse, spin
When the power is switched on, the washing machine will check the cloth automatically.
After that, the water level is set automatically. To select other water level, push the button.
4 Push the WATER LEVEL button to select
suitable water level
""