Filter
Top Products
Washing sequence
8
Spin timer
Wash timer
(To set to below 2 minute,
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
Water inlet
Wash selector
(standard current,
strong current)
SPIN TIMER
WASH TIMER
WASH SELECTOR
OFF
Ç¿Ï´
±ê×¼
ÅÅË®
DRAIN
STANDARD
STRONG
OFF
Figure 4
WASH TIMER
Wash
1.Water-filling selector
Set the water inlet selector at the "WASH" side.
(Figure 1)
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Figure 2
SPIN
WASH
Figure 3
WASH SELECTOR
Figure 5
WASH SELECTOR
Ç¿Ï´
±ê×¼
ÅÅË®
DRAIN
STANDARD
STRONG
OFF
Ç¿Ï´
±ê×¼
ÅÅË®
DRAIN
STANDARD
STRONG