Haier HWD-D1000TXVE Washer User Manual


 
2
Using your appliance will be simple, but please make sure read the following
to get the best out of it and to ensure your own safety.
BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME:
DO
Ensure you connect the appliance directly to a domestic mains water
supply.
Ensure that the appliance is situated on a firm level base.
Ensure that the electrical system meets the requirement laid out in the
installation section of this document.
Use a separate earthed socket for the power supply.
Make sure that the plug is accessible.
Make sure that the power cable is not caught under or in the appliance
and avoid damage to the power cable.
Check that hose joints and connections are firm and no water can leak.
If joints are loose or there is leakage, turn off the tap and repair. Do not
use the washing machine until the hoses are properly fixed.
DO NOT
Connect the appliance to the power supply until installation is
complete.
Install the appliance outdoors or in a damp place. In the event of a
water leak allow the machine to dry naturally.
Expose the appliance to heat sources or direct sunlight to prevent
plastic and rubber components from aging.
Use an appliance with missing parts.
Safety instructions