Filter
Top Products
Delay Extra rinse Wash+Dry ECO Start/Pause
Wash Rinse Spin Dry
Temp
Speed
Prewash
Cotton&Linen
Synthetics
Wool
Quickwash
Wash
Rinse
Spin
Dry
Iron
Air wash
SENSOR DRY
09
BEFORE USE
A ¬
Power switch
_
Press this button to turn the machine on. Press it again to switch it off.
B ¬ Program knob
_
Turn the dial clockwise or anti-clockwise to select the required program. (Refer to
program modes on page 10).
OPERATIONAL FUNCTIONS
A Power button
B Program selection dial
C Detergent distribution drawer
D Spin speed setting button
E Display
F Wash status indicator
G Start/Pause button
H Eco button
I Dry button
J Extra rinse button
K Delay button
L Wash temperature button
AC
J
E
K
F
H
L
G
D
BI
ContRoL pAnEL
See the explanations of the controls on the opposite page.
Wash and Dry(1st 8 settings with green LED’s)
Press the ON OFF button then turn the wash program knob to select the required program.
Press the DRY button(before the wash cycle starts)to make the washer enter dry(mode 9)after the wash cycle has finished.
Press the START/PAUSE button to start the Wash/Dry cycle.
NOTE
Pressing the DRY button a second time(Before the wash cycle starts)will turn off the Auto dryer.
Wash Only(1st 8 settings with green LED’s)
Press the ON OFF button then turn the wash program knob to select the required program 1-8.
Press the START/PAUSE button to start the wash cycle.
Dry Only(Last 3 settings with Amber LED’s)
Press the ON OFF button then turn the wash program knob to select the required program 9-11.
Press the START/PAUSE button to start the wash cycle.