Filter
Top Products
Front Load Washing Machine Model:HW-C1260/1460TVE/ME-U
18
Error message. Motor overheat protection or is damaged.
Troubleshooting:
Y
Cut off power and check if motor wires
are connected well
Reconnect well
Y
Measure if resistance of motor winding by
multimeter,is it as followed?
1-2(between white and white):5Ω
3-5(between brown and red):3.4Ω
4-5(between blue and red):2.9Ω
7-8(between grey and black): 4 0Ω
N
N
Pull out the wire connection of motor and
computer board.Then check if circuit is open
by multimeter
Y
Turn on power and set spin mode,then
start.Check the import voltage
between red wire and red wires, is it
between 220-240V?
N
Put the motor in nomal temperature about
ten minutes,and then test again.If the
resistance is natural, it is caused by
overheated protection.Then check and
deal with overload,abnormal voltage.If
not,please replace motor
Replace computer
board
Y
Repair wires