Haier HW80-B1486 Washer User Manual


 
10
BEF
O
RE
USE
N
Rinse Hold _Press "Rinse Hold " button to start-up/shutdown the crease-resistant and soak function. This feature is only selectable
with the “cotton”, “synthetic”, “Delicate”, “Sport 25”, and “Jeans” programs. When the process runs the last rinse,
the washing machine does not pump the water out, the clothes will remain soaking in water, and the soak icon flashes,
the remaining wash time does not decreasing. If you need to continue the process, you can press "Rinse Hold" button or
“Start /Pause” button to cancel this function, and the icon will disappear, and the washing machine will continue to the
wash program. This feature and the "End Delay" function cannot be selected at the same time.
O
¬ Start/
Pause Button
_ Press the “Start/pause” button, the washer will start and the indicator light remains on. If this button is pressed when
the washing machine is in operation, the washing machine will pause and the indicator light will flash.
If the Start/Pause button is pressed followed by the Power button, the wash program is ended and the washing machine
is switched off.
M
Pre-Wash
_Press the “Pre-wash” button to select or cancel the prewash program. The prewash program can be selected for washing
heavily soiled clothes. Press the “Prewash” button, the “Pre-wash” icon will illuminate. Press the “Pre-wash” again, the
prewash function will be cancelled and the “Pre-wash” icon will go out. When selecting the prewash function, add a proper
amount of detergent into the prewash box, otherwise do not add any detergent into the prewash box. This additional
function applies to “cotton”, “memory”, “synthetic” and “Sport wash” programs only.