Haier HW601201 Washer User Manual


 
08
BEFORE USE
Inicio
Diferido
Aclarado
Extra
Intensivo
Parada
cuba llena
Velocidad
Temperatura
Prelavado
Algodón
Sintético
Lana
Mixto
Deportivo
Rápido 40’
Express 15’
Aclarado
Centrifugado/
Vaciado
Inicio/Pausa
Inicio
A
B
C
D
E
F
G
H
J
K
I
OPERATIONAL FUNCTIONS
CONTROL PANEL
A Program knob
B Power Switch
C Start/Pause button
D Spinning Speed Setting button
E Washing temperature button
F Delay Button
G Detergent distribution drawer
H Display
I
Intense button
J Extra rinse button
K Rinse hold
A ¬ Program knob _By turning the knob clockwise/counterclockwise, the required program can be selected.
There are 10 programs available. After a program is selected, the corresponding light will
go on.
B ¬ Power Switch _ Press this button to switch on the washing machine. Press it again to switch it off.
Press this button gently for 2 seconds to switch off the machine as buttons are soft touch
sensitive.
C ¬ Start/Pause
Button
_ When the washing machine is connected to the power socket and a program is selected,
lightly touch this button to start operation. During a wash cycle, touch it lightly ,operation
will stop and the digits on the screen start blinking. Touch it again to resume operation. To
cancel a wash program during a wash cycle, touch this button, when the digits on the screen
start blinking, press the Power switch, the program will be cancelled.
D ¬ Spinning Speed
Setting Button
_ Touch this button lightly to select the desired speed. When a speed is set, it will be
displayed on the display screen.
Note: Different water temperatures and spinning speeds can be set for
different laundries. Wash using the default settings if there is no special
requirement.
E ¬ Washing
temperature button
_ Touch this button lightly, the washing temperature will be displayed on the display screen.
Select a temperature according to the type of laundry.