Filter
Top Products
Remove the package and check that the machine is
undamaged.
If you have any doubts, do not use the machine and call on
a qualified technician. Keep all packing parts (plastic bag,
foam rubber, screws etc.) out of the reach of children
since they could be dangerous.
Important: The inside of the washing machine which
consists of a floating unit, is fixed with screws at the back
of the cabinet (Fig.1) during transport. Before starting the
machine remember to release the floating unit by
removing the above screws . To prevent water spray from
entering the machine, remember to close the holes left
open by the screws with the plastic caps provided in the
packet containing the owner's manual. And rescrew the
holes where the iron piece is taken down with the former
two screws.Attention:keep the packing screws and plastic
caps in a safe place for later use. It is important for the
machine to be perfectly level (the angle of inclination on
the work surface must not be more than 2 degrees). For
this reason the machine is fitted with adjustable feet used
for levelling the machine before use (Fig.2). In the case of
flooring with carpeting, remember to check that the
ventilation in the support area is not plugged.
Fig.1
Unpacking
levelling and
positioning
Installation
Fig.2