Haier HLP021-WM Washer User Manual


 
End-of-Cycle Signal
The machine will beep at the end of the cycle, indicating that the washing is
complete. The “Wash/Rinse/Spin” indicator lights will still be ON. The washer
will turn OFF automatically in approximately 10 minutes after the completion of
the cycle.
Closing the Top Lid
For safety purposes, the top lid must always be closed during the wash process.
If you open the top lid while the wash cycle is in progress, you will observe the
following:
• An alarm will sound.
• The tub will not spin while the lid is open.
• If the unit is in wash mode, it will stop running.
Simply close the top lid and press the start/pause button to resume the cycle.
Selecting the Water Level
There are 3 pre-set water levels to chose from: Low, Medium and High and 1
manual overide selection using the knob. Your selection may depend on your
wash load.
Turning the knob to “MANUAL” will add more water to your wash load as long
as it is held in that position. Release knob after setting to the desired water level
by manually adding water.
Recommended Water Levels
Load Size in lbs Water Level Approximate
Water used in
Gallons
3.3 High 8.72
1.76 Medium 5.81
Less than 1.76 Low 3.70
English English
Low
Manual
WaterLevel
Medium
High
19