Haier HDY-M60 Dryer Accessories User Manual


 
1. Power up
Insert the power plug into an appropriate power outlet that is properly installed and
grounded. Operating power supply: 220-240V~50Hz.
2. Laundry loading
Open the door and load the laundry into the drum of the dryer. For a more energy
efficient and better drying result, make sure the load has been spun dried.
Loosen
3.Setting drying time
Turn the timer knob to set an optimal drying time according to the fabric type and
quantity. You can choose cool cycle or warm cycle according to your needs and
then press the “Start” button to start the dryer.
4. Program completion
Warm air cycle:
Before the drying time comes to end, the dryer will add cold air to cool the clothes.
After the timer stops, the knob will point to OFF.
Open the door to remove the laundry.
Cool air cycle:
Throughout the cycle, the heater does not activate. The laundry is dried by cool air.
5. Cleaning the filter
Please clean the filter after each load.
5
Maybe tumbledry .
Do not tumbledry.
Normaldry.
Airdry, only.
OPERATING INSTRUCTIONS
the load when placing in the dryer.
Note: Check labels on clothing before placing them in the dryer. Some articles are
not suitable for machine dry. High temperature may damage the fabric.
Note: 1. Before you set the drying time, ensure your hands are dry.
2. Please close the door and press the “Start” button to restart the
machine after adding laundry during the cycle.
Note: 1.To avoid timer interruption, please do not turn the timer knob to the grey area
of the program cycle.
2. Clothes should go through the cooling down/airing phase of the cycle.
If for any reason the dryer is stopped before the cycle has fininshed, dry
clothes should be removed immediately and not left in the dryer. Clothes
should be spread out to cool and not left bunched eg. in a clothes basket.
Before you open the door, please switch off the power supply.