Filter
Top Products
4
5
Dimensions
a = 855 mm
b = 620 mm
c = 595 mm
Weight = 43 kg
Packing accessories
Checklist of the accessories and materials provided with the machine:
Quantity
To ensure the dryer operates normally, attention must be paid to the
following instructions;
■ The dryer must be level when installed. Its bottom is equipped with
adjustable feet. Adjust these 4 feets to level the unit before operation；
■ Check whether there is any damage to the dryer during transportation.
Any damaged dryer must not be used. if the unit is damaged, contact
your dryer supplier;
■ The dryer must be kept away from flammable substances；
■ The surrounding environment must be dry and ventilated;
■ To allow the dryer to perform better, the ambient temperature shall not be
lower than 10
℃
nor higher than 35
℃.
Change the door-opening direction
If the direction of the dryer's door is not suitable to the location, its opening direction
may be changed. The procedure is as follows:
1. Unscrew the 4 hinge screws holding the door onto the machine and remove
the door.
2.
Unscrew the door catch 6 and prise out the catch cover on the opposite side
of the door and transpose them.
3
. Unscrew the door hinges and prise out the hinge covers on the opposite side
of the door and transpose them.
4. Remove the 4 blanking plugs from the screw holes on the machine and insert
them in the holes on the other side.
5. Refit the door on the opposite side of the machine.
a-door hinge b-catch cover c-door
d-hinge cover e-door catch f-blanking plug
Name
Owner's
manual
Certificate of
Conformity
Drainpipe
Installtion Installtion
b
c
c
d e
b
a
e
f