Filter
Top Products
The filter fixed in the
bottom of the drum
Clean the buildup such as lints on filters in time after each use, otherwise it will affect
the performance of your dryer.
Please unplug the power cord first when cleaning it.
1. Remove the filters
Remove by pulling straight up with hands inserted
into the four holes around the exhaust vent shroud
in the sequence of 'Exhaust vent shroud - Lint filter -
Exhaust filter'.(as shown in figure 1)
3. Install the filters
After cleaning, assemble in the sequence of 'exhaust filter
-filter-exhaust vent shroud',align the recesses in the center
of filter with the projection in the center of drum and make
sure that it is firmly inserted (as shown in figure 3)
2. Clean the lints
Separate 'exhaust vent shroud','lint filter' and 'exhaust
filter' and clean the lints on the filter and exhaust filter
with a soft brush or vacuum cleaner. Can also clean the
filters with water.
Do not damage the filters. (as shown in figure 2)
The lint filter must be used for drying.
It must be cleaned in time befor and after each use.
Cleaning of filters
Figure 3
Care And Cleaning
Note: The filter fixed in the bottom of the drum shall also
be cleaned with a soft brush.(as shown in figure 1)
Lints
Exhaust
vent shroud
Dust Cleaner
Figure 2
Figure 1
Lint
filter
Lint Filter
Exhaust
Filter
Exhaust Filter
Do not wash directly with water.
Do not use thinner, gasolene or alcohol.
Do not use any type of spray cleaner when
cleaning the interior. Hazardous fumes or electric
shock could occur. If dryer drum becomes stained,
clean the drum with a damp cloth. Remove any
residue before drying the next load.
Clean cabinet with mild soap and water. Donot use
harsh or abrasive cleaners, this could damage the
dryer.
Clean the interior drum or dryer
housing, with wet soft cloth, if stained.