Filter
Top Products
English
Custom Program: (11)
• This allows you to save a favorite cycle,set the desired settings and press
“Custom Program”button for 3 seconds. A beep will sound to indicate the cycle
has been saved. To recall your custom cycle ,press the “Custom Program”button
before drying a load. To change the saved cycle,set the desired settings and
“Custom Program”button must be pressed again for 3 seconds. You can also
program Anti-Bacterial, Wrinkle Saver and Damp Dry Signal. Press custom
program and press start/pause button to activate.
Digital Display: (12)
• Indicates the remaining time during cycle operation.
Note: If the dryer has any problems, it will display an error message.
Fuction Light Indicator: (13)
- Child Lock: You can lock the controls to prevent any selections from being
changed.Or you can lock the controls after you have started a
cycle. Children cannot accidentally start the dryer by touching
pads when this option is selected.
To lock the dryer,press and hold “Damp Dry Signal”for 3
seconds. A single beep tone is heard and Child Lock will glow.
To unlock the dryer,press and hold the “Damp Dry Signal”for 3
seconds.
- Check Filter: After the power button is pressed, the Check Filter indicator will
flash until Start/Pause is selected.
This is just a reminder to clean the lint filter before the dry
program starts.
- Dry: When lit this indicates the process the cycle is currently in drying mode.
- Cool Down: When lit this indicates the process the cycle is currently in cool
down mode.
24