Haier HDE5000AW Clothes Dryer User Manual


 
English
Custom Program: (12)
This allows you to save a favorite cycle,set the desired settings and touch
“Custom Program”pad for 3 seconds. A beep will sound to indicate the
cycle has been saved. To recall your custom cycle ,touch the “Custom
Program”pad before drying a load. To change the saved cycle,set the desired
settings and “Custom Program”pad must be again programmed for 3 seconds.
You can also program Anti-Bacterial, Wrinkle Saver and Damp Dry Signal.
Touch custom program and touch start/pause pad to activate.
Function Light Indicator: (13)
- Child Lock: You can lock the controls to prevent any selections from being
changed or You can lock the controls after you have started a
cycle. Children can not accidentally start the dryer by touching
pads when this option is selected.
To lock the dryer,touch and hold “Damp Dry Signal”for 3
seconds. A single beep tone is heard and Child Lock will glow.
To unlock the dryer, touch and hold the “Damp Dry Signal” for
3 seconds.
- Check Filter: After the power pad is touched, the Check Filter indicator
will flash until Start/Pause is selected.
This is just a reminder to clean the lint filter before the dry
program starts.
- Dry: When lit this indicates the process the cycle is currently in drying mode.
- Cool Down: When lit this indicates the process the cycle is currently in cool
down mode.
Understanding the Control Panel
HDE/HDG5000AW CHDE5000AW
NOTE: Features may vary per model.
Power On/Off Button: (1)
• Press the button to power on the dryer. To power off, press button again.
Cycle Select Dial: (2)
Select from the Auto-Dry cycles (Bulky Items, Heavy, White, Normal, Delicate
and Press Free) or Manual Cycles (Touch Up, Time Dry, Rack Dry Cycle or
Speed Dry).
22
Panel
1
2
3
4
5
6
7
10
11
12
13
8
9
13
POWER
START/PAUSE