Filter
Top Products
How to use the whitener
First turn the detergent box down before adding detergent.
How to use the washing powder
Direct dissolved in the machine(not applicable for fuzzy
and reserve programs)
1.Fill small quantity of water.
2.Add the power. Run for 30 seconds to dissolve
it completely.
3.Put in the laundries. Select suitable water level.
3 Usage of the detergent
Using process
Using process
Add the concentrated composite washing powder into the box
directly as indicated in the left figure.
See to following table for the dosage of the washing powder.
Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.
Avoid using whitener on laundries with colour or
pattern as they are prone to lose colour.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and
quantity of the whitener.
For powder whitener, please dissolve it before use.
Washing power with poor quality or not used for a long
period may get blocked. Please clean the detergent box
in time.
It is suggested not to use high sudsing detergent.
The instant dissolving of the washing powder:
1. Prepare warm water of 30 and a container.
2. Add the powder while stirring to fully dissolve it.
Please according to the water level , water quantity and
laundries quantity to select powder quantity properly.
Inlet of the concentrated synthetic detergent
Laundries
quantity
(kg)
Water
level
Water
quantity
Common powder, Concentrated powder,
Add 40g in each 30L water
Add 25g in each 30L water
11
About 89L About 119g About 74g
8
About 71L About 95g About 59g
6
About 59L About 79g About 49g
5
About 53L About 71g About 44g
4
About 47L About 63g About 39g
3
About 41L About 55g About 34g
2
About 35L About 47g About 29g
1
About 29L About 39g About 24g
12
About 96L About 129g About 80g
10
About 83L About 111g About 69g
9
About 77L About 103g About 64g
7
About 65L About 87g About 54g
High
Medium
Low
Water level , water quantity and selection of powder