Haier CRDE200AW Clothes Dryer User Manual


 
Auto Dry cycle and Timed Dry cycle
Load clothes into dryer
The appropriate load shall be 1/3 ~ 1/2 of the drum volume. Avoid too much load,
for a certain space is needed to allow clothes free rotation for uniform and wrinkle-
proof drying.
When drying big articles, only 2-3 pieces shall be loaded at a time and
supplemented with middle and small articles.
For elaborate clothes or less load, two towels without lint falling may be added to
get better drying and wrinkle-proof effects.
Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness, electrostatic
chargesaccumulation and more lint.
This program is designed specially for articles like sport shoes. During drying
please make sure the clothes reliably stay on the rack with no risk of entangling
the agitation blade while drum is rotating.
Rack Dry cycle
Auto Dry cycle
1
7
4 62 5
3
Turn on the power switch, the computer board beeps once and the dryer transfers
from off status to the initial operating status (Normal program);
If no "Start/Pause" button is pressed in 5 min after powering on, it automatically
cuts off power and returns to off status;
It returns to off status immediately upon end of a cycle;
Whatever status the computer board is (start, pause, alarm etc.), Pressing
"Power On/Off" button will stop all operations and it enters off status.
1. Press "Power On/Off" button to power on
16
Note: If drying rack is not in place, rolling inner tub could collid with
drying rack and causes damage to the dryer and drying rack.
Cycles
Dry
Cool down
Cycle completed
Extend tumble
Customized
On
Off
Wrinkle
Care
More Time
Less Time
Auto Dry
Rack dry
Timed Dry
Time Remaining
On/Off
Power
Pause
Start
Temp
Air Only(No Heat)
High
Medium
Low
Normal
Heavy
Delicate
Bulky Items
Louder
Softer
Signal
Cycle
Off
Cycles
Timed
Cott
on
Very
DAMP
Level
Dryness
More
Normal
Less
Sensor
Permanent Press
English