Graco 3A1332A Washer/Dryer User Manual


  Open as PDF
of 4
 
Instructions/Parts
24H255 3-Color
Valve Stack Kit
3A1332A
ENG
To convert ProMix
®
2KE Electronic Proportioners to a 3-color valve stack.
For professional use only.
Kit Parts
Install the Dispense Valves
1. Relieve the pressure and remove the valve stack as
explained in your ProMix 2KE Repair/Parts manual
3A0870.
2. Remove the fitting and o-ring from the existi
ng
1
-color manifold (M).
3. Install new o-ring (708) on the spacer (707). Insta
ll
ne
w o-ring (709) on the bottom of the 1-color mani-
fold (M). Align manifolds (M and 701). Install four
screws (711). Torque to 8-10 ft-lb (11-14 N•m).
4. Reinstall the valve stack.
5. Install the solenoid valves. See page 2.
Important Safety Instructions
Read all warnings and instructions in this
manual and in your separate ProMix 2KE
manuals. Save these instructions.
Ref. Description Qty.
701 MANIFOLD, valve, 3-color 1
702 O-RING 2
703 RETAINER, seat, dump valve 2
704 O-RING, PTFE 2
705 VALVE, dispense 2
707 SPACER, manifold 1
708 O-RING, PTFE 2
709 O-RING 1
710 FITTING 1
711 SCREW, cap, socket hd 4
712 PLUG 2
713 VALVE, solenoid; see page 2 2
715 TUBING, red; 5/32 in. (4 mm) OD;
6 ft (1.83 m); see page 3
1
716 TUBING, green; 5/32 in. (4 mm)
OD; 6 ft (1.83 m); see page 3
1
718 CONNECTOR, male; see page 2 4
702
703
704
708
707
709
708
ti16302a
711
701
712
710
705
M
1
These parts are shipped loose.
Torque to 8-10 ft-lb (11-14 N•m).
1
2
1
1
2
1
next