Filter
Top Products
3
1
Remove pedestal, installation hardware, and
instructions from the shipping carton.
2
Position dryer on top of the pedestal.
NOTE:
Because of the weight of the dryer,
two or more people may be needed.
NOTE:
If dryer was previously installed, uninstall
it as follows:
A. Uninstalling an electric dryer:
1) Unplug the power supply cord,
2) Pull the dryer away from the wall enough to
loosen the vent clamp. Loosen the clamp and
carefully remove the exhaust vent from the
dryer exhaust outlet.
B. Uninstalling a gas dryer:
1) Unplug power supply cord.
2) Turn off the gas supply.
3) Pull the dryer away from the wall enough to
loosen the vent clamp. Loosen the clamp and
carefully remove the exhaust vent from the
dryer exhaust outlet.
3
Remove the paper from the
bracket.
for washer/
combo
for washer/
combo
for dryer
for dryer
DRYER INSTALLATION
for washer/
combo
for dryer
for dryer
for washer/
combo
6
Be sure to press the adhesive parts of the brackets
firmly to the appliance.
7
Install the eight (8) screws (supplied) to attach the
brackets to the pedestal.
8
Move the washer/combo to the desired place.
NOTE:
The appliance and pedestal assembly
must be placed on a solid and level floor
for proper operation. Adjust the legs of
the appliance and pedestal by turning
with a wrench. Then, adjust the lock nut
toward the pedestal while holding the
pedestal leg using a wrench.
Lock
nut
Adjustable
feet
Adjustable
feet
Adjustable
feet
Higher
Lower
ENGLISH