Filter
Top Products
CAm
AND CLEANING
USER MAINTENANCE INSTRUCTIONS
The
~b.
The porcelain is self-cleaning. Leave lid open after
washing to allow moisture to evaporate. Do not use
harsh or gritty cleansers.
The Exterior.
Wipe off any spills of washing compounds. Wipe
or dust with damp cloth. Try not to hit surface with
sharp objects.
To Store Washer.
Ask
service technician to remove water
from drain pump and hoses to prevent freezing.
Do not store the washer where it will be exposed
to the weather.
For Long Vacations.
Be sure water supply is shut off at faucets
and drain all water from hoses if weather will
be below freezing.
How to
remove the agitator
To remove the agitator, snap the cap off and
remove the screw. Then remove the agitator extender
(on models so equipped) and the agitator.
To replace the agitator, carefully lower it straight
o
;
down onto the shaft so that it fits snugly into place.
Replace the agitator extender (on models so
equipped), the screw and the cap.
h
1
-.
II
Cap
Screw
Agitator Extender
(on some models)
Agitator
&
,..
u
,/
,,
,
‘
A
Shaft
(Appearance may vary)
How to remove limestone deposits from clogged
Filter-Flo
pan
● Soak filter pan in
a
preheated
160°F.
(7
1
‘C. )
solution of half vinegar and half water for 15
CAUTIONS:
minutes. Then brush-each side of pan with a stiff
bristle brush while flushing with running water.
● Do not soak in porcelain container. Vinegar
can
damage porcelain.
● Do not exceed
180°F.
(82°C.
) or filter pan
may warp.
30