Filter
Top Products
WARNING—To reduce the risk of fire, electric shock, or injury to persons when using your
appliance, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
(
Err,a
C/ean,ng
NORMUSOIL
Cflbs
I
I — I
La
@
Ten
cycle
Two Speed Washer
~,th
M,”, w.sh
e
e
o
0
‘ea”D””Ex’’’Lgecapaci”i”
@d
Sorting and Loading
Control panel appearance may vary .\lightly
● Sort clothes carefully by fabric
type, weight, color and amount
of soil, according to instructions
in How to Sort Clothes section.
● Remove the
Filter-Flo
pan
and Mini-
Basket tub.
The underside
of the lid is a
good place to put the pan while
loading or unloading clothes.
Do not use the Mini-Basket tub
when washing regular loads.
You’ll find complete details on
how and when to use it in How to
Use the Mini-Basket Tub section.
●
Add measured amount of detergent.
See Detergents, Other Additives
section for information on detergents
and other laundry additives.
● Load clothes into wash basket,
being careful not to overload.
Clothes should be below retaining
ring. See How to Load Your Washer
section for more information.
● Position the
Filter-Flo
pan on
the agitator. Lint will collect in
the pan for easy removal when
the wash is finished.
Do not use the
Filter-Flo
pan
as a wash basket.
Do not put
any items to be washed in the
Filter-
Flo
pan.
● See How to Use Bleach
Dispenser section for information
on the Bleach Dispenser.
● See How to Use Fabric Softener
Dispenser section for more
information on the Fabric
Softener Dispenser.
● For information on bleaches
and fabric softeners, see Other
Laundry Products section.
●
Close the lid. Washer will fill
but not agitate or spin with the
lid open.
Setting the Controls
Use the Controls Setting Guide to
e
help you make the proper selections.
@
Select
WasMSpin
Speed.
~
Select Water Level.
9
SMALL: Washer is less than
1/3
full
of clothes.
MEDIUM: Between 1/3 and 1/2 full.
o
LARGE: Between
1/2
and 2/3 full.
EXTRA LARGE: Over 2/3
full.
MINI-BASKET: Not used for regular loads.
See How to Use the Mini-Basket Tub section.
If you want to increase water level after you’ve made
a selection, turn knob to RESET and
select
new level.
o
Select Wash/Rinse Temperature. Cold rinse
will
be automatically provided with use of Permanent
Press and Knits Cycles.
Select Extra Rinse, if desired. Turn knob to ON
to get a second deep rinse in the Regular Cycle.
If no Extra Rinse is desired, turn knob to OFF.
Push Cycle Selector knob in and turn clockwise to
your selected wash setting.
Pull Cycle Selector knob
out
to start the washer.
If you wish to change
~
START ,
setting after washer
has started, push Cycle
Selector knob in to stop
9
,,
k
\
STOP
~
the washer and reset to the
=
new position. Setting can be changed at any time.
5