GE WWA8837R Washer User Manual


 
HOW TO OPERATE YOUR CLOTHES WASHER
k
WARNING—To reduce the risk of fire, electric
shock, or injury to persons when using your
appliance, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
1
\
W8sMpin
Speed
D“”RMA’
;:
“:&m;’”
MEDIUM
.
~“”,
SMALL+
,,$,,,
J
@
S....leTwo
SpeSdWaSherwthMintWashash
,Uu
w,.,,,,,
,0,,
.,,w
Heavy
Du~Etira
large
Capxi~
o
e
Q
o
0
Sorting and Loading
C(,,zlro[pune[
clppearnace tnuy
vur~
.vlightl.v
Sort clothes carefully by fabric type, weight, color
Load clothes into wash basket, being careful not to
and amount of soil, according to instructions in How
overload. Clothes should be below retaining ring.
to Sort Clothes section. See How to Load Your Washer section for more
Remove the Filter-Flo pan
information.
and Mini-Basket tub. The
Position the Filter-Flo pan on the agitator. Lint will
underside of the
lid
is a good
collect in the pan for easy removal when the wash is
place to put the pan while
finished.
loading or unloading clothes.
Do not use the Filter-Flo pan as a wash basket.
Do
Do not use the Mini-Basket tub when washing
not put any items to be washed in the Filter-Flo pan.
regular loads. You’ll find complete details on how
See How to Use Bleach Dispenser section for
and when to use it in How to Use the Mini-Basket
Tub section.
information on the Bleach Dispenser.
For information on bleaches and fabric softeners,
Add measured amount of detergent. See Detergents,
Other Additives section for information on detergents
see Other Laundry Products section.
and other laundry additives.
Close
the lid. Washer will fill but not agitate or spin
with the lid open.
Setting the Controls
Use the Controls Setting Guide to help you make the
e
proper selections.
@
Select Wash/Spin Speed.
@
@
Select Water Level.
o
SMALL: Washer is less than 1/2 full of clothes.
MEDIUM: Between 1/2 and 2/3 full.
LARGE: Over 2/3 full.
MINI-BASKET: Not used for regular loads. See How
to Use the Mini-Basket Tub section.
Select Wash/Rinse Temperature
Push Cycle Selector knob in and turn clockwise to
your selected wash setting.
Pull
Cvcle
Selector knob
.
out to start the washer.
If you wish to change
setting after washer
“m
has s~rted, push Cycle
Selector knob in to stop
=SToP@
w
the washer and reset to the
new position. Setting can be changed at any time.
5