Filter
Top Products
,.
- . -.. .... ..-—
—.
How to operate your clothes washer
W~G—To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
Wash/Spin Speeds
Var/ab/e Waler Level
Wash/Rinse Temp
T %2?R[SE1 ‘fffl. ..~ 11::”0<=
p.t!iiil
RegularCycles
IKAVV ●
OFI
o.
04
L
OFr
AU1O txIRA RINS1
0.
51flR1
.fD,”.$$jiJu&,O,:f$i)”o,,
SMALL ●
COLD
WARM
ExtraClean Cycle
/
\
w,! ““o, ,, ,,,.! w,. ,, >,”,
Sorting and hading
● Sort clothes carefully by fabric
type, weight, color and amount of
soil according to instructions on
page 11.
● Remove Filter-Flo” pan and
Mini-BasketTMtub. The underside
of the lid is a good place to put the
pan while loading or unloading
clothes.
.,
Do not use Mini-Basket tub when
washing regular loads. You’ll find
complete details on how and when
to use the Mini-Basket tub
on page 10.
● Add measured amount of
detergent. See pages 13 through 17
for information on detergents and
other laundry additives.
● Load clothes into the wash basket,
being careful not to overload it.
Clothes should be below the
retaining ring. See page 12 for
more loading information.
● Position the Filter-Flo pan on the
agitator. Lint will collect in the pan
for easy removal when the wash is
finished.
NOTE: Do not use the Filter-Flo
pan as a wash basket. Do not put
any items to be washed in the
Filter-Flo pan.
. See pages 8 and 9 for information
on how to use Bleach and Fabric
Sofiener Dispensers. For information
on bleaches and fabric softeners,
see page 17.
● Close the lid. Washer will fill but
not agitate or spin with the lid open.
Setting the Controls
Use the Controls Setting Guide on
pages 6 and 7 to help you make the
proper selections.
~ Select Wash/Spin Speed.
~ Select Water Level.
SMALL: Washer is less than 1/3
full of clothes.
MEDIUM: Between 1/3 and 1/2 full.
LARGE: Between 1/2 and 2/3 full.
EXTRA LARGE: Over 2/3 full.
MINI-BASKET: See instructions
on page 10.
If you wish to increase level after
you’ve made a selection, turn knob
to “RESET” and select new level.
@ Select Wash/Rinse Temperature.
@
Cold rinse will be automatically
provided with use of Permanent
Press and Special Cycles. (An
extended cool-down spray rinse
and cold water deep rinse are
provided to minimize setting of
wrinkles. )
~ Push Cycle Selector Knob in
and turn clockwise to your selected
wash setting.
*
3
WART
/ ‘“ ‘
~ Pull Cycle Selector Knob out
to start the washer. If you wish to
change setting after washer has
started, push Cycle Selector Knob
in to stop the washer and reset to
the new position. Setting can be
changed at any time.
,