Filter
Top Products
HOW TO OPERATE YOUR CLOTHES WASHER
u
WARNING-To reduce the risk of fire, electric shock, or injury to persons when using your
appliance, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
\
1
@
7Cyc,.ExtraL*rgeCapaci~
~
W,,
w,m,,m,
,“,”,0,,,,
9
Q
HeavVDu~2Speed Washer
o
C(mtrol panel appearance may vary .rlightly
Sorting and Loading
● Sort clothes carefully by fabric
type, weight,
color and amount
of soil, according to instructions
in How to Sort Clothes section.
●
Remove the
Filter-Flo pan.
The underside
of the lid is
a good place
to-put the pan while
loading or unloading clothes.
s
Add measured amount of
detergent. See Detergents,
Other Additives section
for information on detergents
and other laundry additives.
●
Load clothes into wash basket,
being careful not to overload.
Clothes should be below
retaining ring. See How to
Load Your Washer section for
more information.
● Position the Filter-Flo pan on the
agitator. Lint will collect in the
pan for easy removal when the
wash is finished.
● Do not use the Filter-Flo pan
as a wash basket. Do not put
any items to be washed in the
Filter-Flo pan.
● See How to Use Bleach
Dispenser section for information
on the Bleach Dispenser.
● For information on bleaches
and fabric softeners, see Other
Laundry Products section.
●
Close the lid. Washer will fill
but not agitate or spin with the
lid open.
Setting the Controls
Use the Controls Setting Guide to
help
you make the
@
proper selections.
O
Select Water Level.
SMALL: Washer is less than 1/2 full of clothes.
MEDIUM: Between 1/2 and 2/3 full.
LARGE: Over 2/3 full.
~
Select
WasMRinse
Temperature.
@
Push Cycle Selector knob in and turn clockwise to
your selected wash setting.
Regular Cycles automatically provide normal
wash speed and normal spin speed.
Permanent Press and Knits Cycles automatically
provide gentle wash speed and gentle spin speed.
Pull Cycle Selector
:::::::*
‘=
the washer. If you
setting after
STOP
@
-
washer has started,
push Cycle Selector knob in to stop the washer
and reset to the new position. Setting can be
changed at any time.
5