Filter
Top Products
How to Care for YourWasher
User maintenance
instructions
The Tub.
The porcelain is self-cleaning.
Leave lid open after washing
to
allow moisture to evaporate. Do
not use harsh or gritty cleansers.
The Exterior.
Wipe off any spills of washing
compounds. Wipe or dust with
damp cloth. Try not to hit surface
with sharp objects.
To store washer:
Ask service technician to remove
water from drain pump and hoses
to prevent freezing.
Do not store the washer where it
will be exposed to the weather.
For long vacations:
Be sure water supply is shut off at
faucets and drain all water from
hoses if weather will be below
freezing.
To move washer:
Contact authorized factory service
outlet and have washer crated to
protect the suspension system and
cabinet.
To reinstall washer:
Call your authorized factory
service outlet for installation.
Or, install it yourself using the
installation instructions you
received when you purchased
washer.
*
‘Ail\
How to remove limestone
\
deposits from clogged
Filter Flo” pan
● Soak filter pan in a pre-heated
160°F (71‘C) solution of half
$?%’
Lubricate
with
grease
or
Petroleum
Jelly.
vinegar and half water for 15
minutes. Then brush each side of
pan with a stiff bristle brush while
flushing with running water.
I CAUTIONS:
● Do not soak in porcelain
container. Vinegar can damage
porcelain.
l-l
w
k
● Do not exceed 180”F (82”C) or
The Activator” agitator
Remove at regular intervals—
about 4 to 6 months—and remove
any lint that may have
accumulated. No tools are needed,
simply grasp agitator with both
hands and pull straight up sharply.
The slotted section at the top of
the metal shaft has a light coating
of lubricant to prevent parts
sticking together. If this area
appears to be dry, apply a light
coat of grease or Petroleum Jelly
around the slotted section of the
shaft before replacing the agitator.
Do not overgrease. Excess grease
may get into clothes load.
When replacing the agitator,
carefully lower straight down onto
the shaft so that it fits into the
slots. Then apply downward
pressure until agitator snaps into
its normal position.
26