GE WSM2480DWW Washer/Dryer User Manual


 
GE Appliances
WSM2420/80D – GE
®
24” Unitized Spacemaker
®
Washer/Dryer
Specification Revised 5/09
360327
Dimensions (in inches)
Floor line
Distance
from vent
to back 4-1/2"
28-5/8
Water
inlet-
cold
1" For leveling legs
32-1/8
27-1/4
23-7/8
27-5/8
71-3/4
32-1/2
23-7/8
27-5/8
27-1/4
38
71-3/4
1-1/2
21-5/16
8
Drain
27-1/2
WSM2420/2480S
Electrical Requirements:
WSM2420D:
Electric Dryer –This appliance should be connected to an individual, properly
grounded branch circuit with 120/240V single-phase 60Hz electrical service and should
be protected by 30-amp time-delay fuses or circuit breakers. This appliance is
manufactured with the neutral connected to the frame. Power cord should be
purchased separately.
Note: These appliances are not approved for 120-volt operation.
WSM2480D:
Gas Dryer This appliance should be connected to an individual, properly grounded
branch circuit with a three-prong grounding-type receptacle and 120-volt single-phase
60 Hz electrical service and should be protected by 15- or20-amp time-delay fuses or
circuit breakers. This appliance is equipped with a 6-foot long flexible U.L. listed
20-amp power cord to match a 15-amp receptacle.
Gas Rated input 10,500 BTU/HR. Factory equipped for natural gas. Tested for LP gas.
Dryers must be exhausted to the outside.
Installation Information:
For complete information, see installation instructions packed with the product.
Power Cord Location
Model WSM2420
Back View
Power
Cord Hole
41-1/2
9-1/2
Model WSM2700
Back View
Power
Cord Hole
41
12-1/2
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.