Filter
Top Products
12
Operating Instructions Safety InstructionsCustomer Service Troubleshooting Tips
Problem Possible Causes What To Do
Pilling
Result of normal wear on • While this is not caused by the washer, you
poly-cotton blends and can slow the pilling process by washing
fuzzy fabrics garments inside out.
Grayed or yellowed
Not enough detergent • Use more detergent (especially with larger loads).
Hard water • Use a water conditioner like Calgon brand or install
a water softener.
Water is not hot enough • Make sure water heater is delivering water at
120°F.–140°F. (48°C.–60°C.).
Washer is overloaded • Select load size to match clothes load.
Detergent is not • Add detergent as wash basket fills with water before
dissolving you load clothes.
Dye transfer • Sort clothes by color. If fabric label states
wash
separately,
unstable dyes may be indicated.
Washer is noisy
Washer is uneven • Make sure washer is level and firm to the floor.
Washer load is • Push the Cycle knob in to stop the washer, open the
unbalanced lid and redistribute the load evenly. Close the lid
and restart.
Washer pauses in cycle
The washer normally pauses
between washing steps
Clothes too wet
Incorrect cycle selected • Make sure the cycle selected matches the load
you are washing.
clothes
Before you call for service…